Moen faucet model number – The Moen faucet’s model or serial number is usually a four or five-digit code beginning with the number 7 or 8. The rest of the code generally comprises random letters. You may also spot the serial number of the faucet on the underside of the spout.
However, you will see that it is most commonly written at the back of the decorative ring present at the bottom of the spout.
If you find that your faucet is defective or is malfunctioning, you can order replacement parts by calling 1-800-289-6636 if you reside in the US. Canadians can dial 1-800-465-6130. You can also write a letter to Moen Incorporated, 25300 Al Moen Drive, North Olmsted, OH 44070-8022. You should also attach the original sales receipt to substantiate all your warranty claims.
For several years now, Moen tub and shower valves have been manufactured using one of three valves. These valves are namely the Standard valve, the Posi-Temp valve, and the Moentrol valve.
The valves all look similar but the trim is not necessarily interchangeable. In the case this is the way your Moen valve operates, any Posi-Temp trim will fit.
To replace a Moen kitchen faucet cartridge, turn off the water source and drain any remaining water from the tap. Proceed to remove the faucet handle cap and be careful not to scratch the finish.
This will expose a screw that will enable you to remove the handle dome. Once you pull out the cartridge with your pliers, wipe off any dirt or debris from the valve body. Insert the new cartridge with the locator tabs perfectly aligned.
Related Questions to How Do I Find My Moen Faucet Model Number
How do I know what bathroom faucet I have?
You can easily spot an American Standard faucet by its 22-point broach. To verify your initial guess, you can go ahead and measure the broach. If the broach turns out to be 0.375 inches (0.95 cm), then it is an old American Standard model faucet.
In contrast to this, if the broach turns out to be 0.438 inches (1.11 cm), then it is a current American Standard model faucet.
How do I know what model Moen faucet I have?
We have already explained how you can determine the model of the Moen faucet you have. The serial or model number is generally 4 to 5 digits long and begins with the numbers 7 or 8. The rest of the code may consist of letters.
How do you remove a cartridge from a Moen faucet?
To remove and install the Moen faucet cartridge, first, turn off the water supply and open the faucet handle to relieve any water pressure and drain the lines. Gather the right tools for the job.
These will include a screwdriver, a wrench, and some pliers. Now, detach the handle using the screwdriver. Remove the cartridge nut, pull it out, and you are done removing the cartridge from a Moen faucet.
How do I get a free Moen cartridge?
Moen offers a great replacement policy on its cartridges. As long as you have the original proof of purchase, you can easily get a new cartridge shipped to your address. As has been previously mentioned, call 1-800-289-6636 if you reside in the US. Canadians can dial 1-800-465-6130.
Are shower valves universal?
One must note that shower and tub valves are not interchangeable. You cannot make the mistake of mixing manufacturers on trim and rough-in valves.
Even if you order the products from the same manufacturer, you should note that they have many valves and trims that are not interchangeable. It is important to remember that shower sets are not always sold as separate trim and rough.
How do I find the make and model of my kitchen faucet?
You will see that the model number of your faucet will be printed on a tag that is attached to the cold water supply line. You can locate the supply line by looking below the sink, the countertop, the bath rim, or behind the bowl of a bidet. The model number will generally be preceded by ‘P/N’.
How do I know what kind of faucet I have?
To determine the kind of faucet you have, first, try to look for the logo. This will tell you the brand your faucet belongs to. After this is done, try to find a model number. Count the splines on the broach and measure its dimensions accurately. Look for any distinguishing features and use a broach gauge.
Are all Moen kitchen faucet cartridges the same?
No, they are not. However, the Duralast two-handle cartridges can fit kitchen and lavatory faucets along with two- and three-handle tub and shower faucets that were created even before the launch of the Duralast cartridge. One must note that this does not imply that 1224 and Duralast cartridges are interchangeable.
Where do I find my shower faucet model number?
You will find your shower faucet model number printed on a tag that is attached to the cold water supply line of the faucet. Look for the supply line near your shower.
How do I identify my Moen shower valve?
Moen’s products have a unique code that is usually a four or five-digit number beginning with 7 or 8. This code is generally followed by letters. This code should help you determine if your shower valve is Moen’s or some other company’s.
How do I choose a kitchen faucet size?
Choosing the right kitchen faucet size involves a few steps. Firstly, you should determine the scope of your project and fix a budget. Take careful stock of the position of the sink and the mounting holes. After this is done, proceed to measure the faucet centers and then check the surrounding space.
Are shower faucets universal?
No, you cannot make the mistake of thinking that shower faucets are universal. Users must remember that they cannot mix manufacturers when it comes to trim and rough-in valves.
Each company produces different-sized valves that are not universal or interchangeable with each other. You might not even be able to procure a shower faucet individually as shower sets are always sold as a complete set.
Are Moen replacement cartridges free?
Moen has a great replacement policy that allows you to exchange defective or leaky cartridges that are covered under the warranty period. All you need to do is call the company and show them proof of your purchase. A replacement cartridge will then be shipped to your address in a few days.
Are all shower valves universal?
As we have previously discussed, all shower valves are not universal.
Does Home Depot carry Moen parts?
You might be able to buy some Moen parts from your local Home Depot unless the products are out of stock. Go to the plumbing section of the store and ask a customer service associate to show you to the Moen section.
How can I tell what brand my kitchen faucet is?
You can easily determine the brand of your kitchen faucet by checking the logo printed on the faucet. If you are unable to spot the logo, you can check for the model number.