Table Of Wrench Sizes And Conversions
Inches Millimeters Spanner
AF 0.563 9/16
0.591 15mm
3/8 BSF; 0.600 5/16 Wworth
0.625 5/8 AF AF AF AF AF AF AF AF
Also, what is the equivalent of a 15 mm wrench?
Bolts Wrench Size Chart
Bolt Dimensions
Wrench Dimensions (Standard)
Wrench Dimensions (Metric)
3/8″ 9/16″ 15mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
What is the equivalent of a 14mm socket, for example? Wrench Conversion Chart (Standard vs. Metric)
Standard Metric Bolt Diameter
3/16″ 3/8″ 10mm
1/4″ 7/16″ 11mm
5/16″ 1/2″ 13mm
3/8″ 9/16″ 14mm
What is the SAE equivalent of 15mm, by the way?
Conversion Chart from SAE to Metric
SAE Metric Inch
9/16″ 0.563
15mm 0.591
19/32″ 0.594
5/8″ 0.625
What is a 12mm socket’s equivalent?
Converting Wrench
Equivalent Sizes of Wrench Conversion Table
Standard and Metric wrench sizes (where they CLOSELY match, and when they don’t – wrench equivalent) are compared in 1/1000s of an inch.
3.69 0.46875 15/32 and 12mm are close enough
28 0.47244
12 0.50000
Related Questions to 15mm Wrench’s Equivalent
Is 10mm greater than 38mm?
It’s the same dimensions. The measurement in inches is 3/8, and the measurement in millimetres is 10mm.
In inches, how thick is 2mm?
Table of millimetres to inches conversions
Centimeters (mm)
(inches) “( (decimal)
(inches) “( (fraction)
1/64 ′′ 1 mm 0.0394 ′′
5/64′′ 2 mm 0.0787′′ 2 mm 0.0787′′ 2 mm 0.0787′′ 2 mm 0.0787′′ 2
3 mm 0.1181 ′′ 1/8 ′′ 3 mm 0.1181 ′′ 1/8 ′′ 3 mm 0.1181
4 mm 0.1575 ′′ 5/32 ′′ 4 mm 0.1575 ′′ 5/32 ′′ 4 mm 0.1575
In an inch, how many 32nds are there?
Conversion Chart from Millimeters to Inches
Inches in millimetres (approximate)
16 5/8 20/32
17 11/16 21/32
18 11/16 23/32
What is the diameter of a 14mm bolt?
Bolt Head/Wrench Size in Metric
Bolt Dimensions (mm)
Size of the head/wrench (mm)
ANSI/ISO JIS
8 13 12
10 16 14
12 18 17
What is the next smallest size after 1/2 inch?
Conversion Table for Ear Gauge to Millimeters
Gauge Millimeters(mm) Inches
10 mm 3/8 00g”
7/16″ 11 mm”
1/2 mm 12 mm”
9/16″ 14 mm”
What is the best way to remove a rounded bolt?
A little screwdriver or flat blade wedged between the part and the bolt, nut, or screw head is a simple technique to get the bolt back to the good part of the threads. Apply force to the bolt to force it out and unthread it. This is a miracle worker. The hole may be stripped at times.
What’s the difference between 14mm and 15mm?
12mm = about 15/32 inch (almost 1/2 inch) 13mm is somewhat more than 1/2 inch. Nearly 9/16 inch is 14mm. 15mm is around 19/32 inch.
What method is used to determine the size of a wrench?
If necessary, use a pocket calculator to multiply the first number, which is the bolt size in inches or millimetres, by 1.5. For example, 1/2 x 1.5 =.75 or 3/4, which is the wrench size required for this standard-sized bolt, as shown in Step 1.
What is 1/2 inch’s metric equivalent?
Conversion table from inches to millimetres
(inches) “Millimeters are the smallest unit of measurement (mm)
6.35 mm 1/4 ′′
12.7 mm 1/2 inch
1′′ (25.4 mm)
2′′ (50.8 mm)
What is 3/4 inch’s metric equivalent?
For the Toolbox, there’s some math. Converting SAE to Metric.
inch inch mm
3/4 0.750 19.050
49/64 0.766 19.447
25/32 0.781 19.844
51/64 0.797 20.241
Is there a difference between 9/16 and 14mm?
To address your question, 9/16 SAE is really 14.3 Metric, although it is the closest SAE size that can fit a 14mm metric head.
Is it necessary for me to have both metric and SAE wrenches?
Yes, some sockets are available in both metric and SAE sizes. However, you must be cautious because they are rarely identical, and using an SAE socket on a metric bolt can strip it, and vice versa.
Is 16mm bigger or smaller than 5 8mm?
Yes, 16mm is equal to 5/8 inch “, and it’s near enough that 8mm = 5/16! If anything, the 5/8 wrench will fit significantly tighter on a 16mm bolt because 19mm is practically interchangeable with 3/4″ and 13mm is only barely off a 1/2”.
Is the diameter of 7/8 the same as 22mm?
7/8″ equals 0.875″; 22mm equals 0.866142 “As a result, the 22mm would provide a somewhat tighter fit, making it less prone to strip.
What is the SAE equivalent of 10mm?
Conversion Chart from SAE to Metric
SAE Size Metric Size Decimal SAE Size Metric Size Decimal SAE Size Metric Size Decimal SAE Size
10mm 0.394
13/32″ 0.406
11mm 0.433
7/16″ 0.438
In SAE, what is 16mm?
To directly address your question, 5/16″ equals 8mm, 7/16″ equals 13mm, 5/8″ equals 16mm, and 3/4″ equals 19mm.
In inches, what is a 10mm wrench?
Table Of Wrench Sizes And Conversions
Inches Millimeters Spanner
1/8 Wworth; 0.344 11/32 AF
0.354 9mm 9mm
0.375 3/8 AF AF AF AF AF AF AF
0.394
10mm 10mm